Candle Wick Sustainers - 20mm Base - 6mm Height

Candle Wick Sustainers - 20mm Base - 6mm Height
  • Code: TCDL-CSUS-BWED-C20X6
  • Manufactured by: Wedo

£1.40 inc. VAT (£1.17 exc. VAT)

Please Choose:


Get it Tomorrow if you order within and choose next day shipping at checkout

Vegan Friendly
Cruelty Free

Available for collection

Order By 12.00pm For Next Working Day Delivery* *select delivery upgrade at checkout

Wick Sustainers (also referred to as Metal Tabs) are required to hold your wick in place at the bottom of the heat resistant container and stops the wick from simply floating to the surface of the candle when you pour in the molten wax. To use, crimp the wick and place into the hole in the sustainer - if you find this difficult, try using small plyers. You can use a small amount of glue placed into the hole beforehand and then allow it to set with the wick in place.

When placing the sustainer on the bottom of the container, if you have some Blu Tac handy, a little tip is to place a very small amount under the sustainer and stick it to the bottom of the container. Alternatively you can use a double-sided sticky paper spot/tab available from all good stationery stores and some food retail outlets.

This sustainer is 20mm in width, is suitable for relatively large sized containers and made of Mild Steel. If using a small to medium sized container select the 15mm option. The height of the sustainer can be selected from the drop down box above. If you are not used to using sustainers, then the larger of the two (6mm) can make it slightly easier to hold the wick in place.

  1. Home
  2. Candle Wicks
  3. Candle Wick Sustainers - 20mm Base - 6mm Height
© 2021 Cosy Owl. All rights reserved.

Candle Wick Sustainers - 20mm Base - 6mm Height

Candle Wick Sustainers - 20mm Base - 6mm Height

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock